Advertisement

Advertisement

Advertisement

Advertisement

  1. Home
  2. /

  3. Motocross
  4. /

  5. Motocross
  6. /

  7. News

Advertisement

New! The Ducati Desmo250 MX with traction control will be available at dealers from July

The Desmo250 MX will be available from selected Ducati dealers in Europe from July 2026. The newly developed engine with desmodromic valve control is expected to reach up to 15,000 rpm.

Motocross

This article is an automatically generated English version. The Original Article was published in German.

Advertisement

Advertisement

The Ducati Desmo250 MX has been competing in the MX2 World Championship and the EMX250 since the start of this year and has already achieved some notable successes. After an initial injury-enforced break, Ferruccio Zanchi has finished in the top 10 on several occasions this season on the Desmo250 MX. Ducati is placing particular emphasis on the Desmodromic valve system and traction control. The latter is actually banned in motocross, but Ducati has taken a different approach here.

Advertisement

Advertisement

Desmodromic valve train

The Desmo250 MX is powered by a new desmodromically controlled 249.7 cm³ engine. The advantages of desmodromics are explained in this article. The engine is said to reach up to 15,000 rpm and have a particularly smooth torque curve.

Traction control

Interestingly, Ducati explicitly advertises ‘traction control’, even though classic traction control is expressly prohibited in motocross under the ‘technical regulations’. The relevant passage can be found in Article 25.05 / 25.05.01 of the FIM document on page 10: 25.05 Other equipment: ‘The use of data recording devices and automatic electronic ignition is authorised. (The use of data recording devices and automatic electronic ignition systems is permitted). 25.05.01: Wheel speed sensors are forbidden. (Sensors for measuring wheel speed are prohibited).

However, the Ducati’s traction control is not intended to operate according to the ‘wheel spin’ principle – which is banned in motocross and involves comparing the front wheel’s rotational speed with that of the rear wheel – but rather through variable mapping. According to Ducati’s statement: “The Desmo250 MX features a highly advanced electronics package derived directly from the Desmo450 MX and specifically tuned to the characteristics of the 250cc engine. Two engine maps, which can be individually adjusted via the X-Link app, allow the throttle response to be fine-tuned. Ducati Traction Control is adjustable across three levels, Engine Brake Control across two levels, and Launch Control across three levels. This allows every rider to optimally adapt the motorbike to their riding style, surface and racing conditions.”

Advertisement

Advertisement

Patented traction control

“The Ducati Traction Control deserves special mention. Drawing on experience from MotoGP and the World Superbike Championship, Ducati has developed a genuine traction control system for which a patent application has been filed. The system enhances safety, reduces physical strain on the rider and can improve lap times. Unlike the systems previously available in this segment, the Ducati Traction Control (DTC) on the Desmo250 MX regulates power reduction based on actual rear-wheel slip. This ensures it operates effectively, quickly and consistently.”

Rear-wheel slip is therefore to be detected without a comparative measurement against the front wheel. The crucial point is clause 25.05.01 of the regulations: ‘Sensors for measuring wheel speed are prohibited.’ Ducati uses the DTC system without measuring wheel speed, ‘based on the actual rear-wheel slip’. At first glance, this sounds like a paradox, but Ducati appears confident that its traction control complies with the regulations.

It states: “Like every Ducati, the Desmo250 MX has its roots in racing. It is there that Ducati tests technologies and solutions which are subsequently incorporated into series production. The motorbike was developed with Alessandro Lupino in the prestigious Italian MX2 Championship. The Desmo250 MX inherits the strengths of the Desmo450 MX: precision, control and reliability. These are characteristics that are particularly crucial in the highly competitive MX2 class, where the bike often makes all the difference.”

Advertisement

Advertisement

Desmodromic single-cylinder engine with 15,000 rpm

Ducati explains: “The Desmo250 MX is powered by a completely newly developed engine: compact, lightweight (24.7 kg) and powerful. It delivers 44.5 PS at 12,500 rpm. In developing it, Ducati drew on its experience with the Panigale V4 R, the brand’s technological flagship. The Desmo250 MX adopts the bore and stroke dimensions of 81 x 48.4 mm from this model, as well as some of the most advanced technical solutions. However, flow conditions, port geometries, valve timing profiles and flywheel masses have been specifically tailored to the demands of motocross. The aim was to create an engine that delivers power in every riding situation. Particular attention was paid to achieving a smooth and balanced torque curve across the entire rev range, combined with responsive performance at low revs and powerful performance at high revs. This allows the advantages of desmodromic valve control to be fully utilised in crucial racing situations: at the start, when accelerating out of corners and during the redline phase. Precisely where every tenth of a second counts.”

Titanium intake valves

“Desmodromic valve control is Ducati’s technological hallmark and reaches its full potential in the Desmo250 MX. Titanium intake valves, steel exhaust valves and the high precision of the valve timing enable revs of up to 15,000 rpm – a new benchmark in this class. This allows riders to stay in each gear for longer and reduce the number of gear changes.”

Performance and Rideability

«Fuel delivery is handled by a 44 mm Mikuni throttle body. The completely newly developed exhaust system maximises power and rideability, whilst at the same time complying with international noise regulations for motor racing. The powertrain is rounded off by a five-speed gearbox developed specifically for the Desmo250 MX, featuring an automatic upshift mechanism, as well as a hydraulically operated Brembo clutch with seven friction plates and a disc spring. This solution ensures precise and smooth acceleration and is designed to withstand the high stresses of motocross use over the long term. The result is an engine that enables riders of all ability levels to realise their full potential, without compromising on the demands of ambitious racers.”

Confidence on the track

“The Desmo250 MX’s chassis is based on the perimeter frame and aluminium swingarm of the 450. Ducati’s engineers specifically optimised the stiffness values to ensure the most precise handling feel and maximum confidence in all conditions – particularly in the areas where a 250cc bike really comes into its own: under braking and through corners.»

Advertisement

Advertisement

Chassis

“These objectives were also achieved through the suspension set-up. The Showa fork and Showa rear shock feature damping elements developed specifically for this model. The aim was to achieve neutral handling with minimal load-change reactions during braking, acceleration and cornering. The result is a motorcycle that is intuitive to ride and can unleash its full potential on a wide variety of routes and surfaces. The ready-to-ride weight of just 103 kilograms (excluding fuel) also contributes to this.”

Pirelli tyres

“Agility is further enhanced by the standard-fit Pirelli Scorpion MX32 tyres. In addition to high grip, the 100/90-19 rear tyre ensures particularly quick steering response and high agility when changing direction,” states Ducati’s press release.

Brembo brakes

“The braking system is the same as that of the Desmo450 MX: a Brembo system with Galfer brake discs measuring 260 mm at the front and 240 mm at the rear offers uncompromising braking performance and excellent modulation – even in the 250cc class.”

Intelligent maintenance

The flexible and intelligent maintenance concept, already familiar from the Desmo450, has been carried over to the 250cc model: “Thanks to Ducati Corse’s experience in the Superbike World Championship and MotoGP, a special algorithm has been developed that calculates engine stress in real time based on operating parameters and riding conditions. Based on this data, the system continuously adjusts the maintenance intervals. The information is provided via the Ducati X-Link app. As a result, inspection and maintenance work is tailored to the actual use of the motorbike. Professional or particularly intensive riders are allocated shorter maintenance intervals, whilst leisure riders benefit from longer maintenance intervals. In this way, Ducati goes beyond traditional, rigid maintenance schedules.”

Advertisement

Advertisement

‘MID’ and ‘FULL’ service levels.

“The MID service includes checking the valve clearance after 45 operating hours and replacing the pistons. Depending on the calculated engine load, this is carried out every 45 to 60 operating hours. The FULL service involves a complete engine overhaul and is usually carried out between 90 and 120 operating hours, depending on road conditions and riding style.”

Accessories

“With the Ducati Performance range of accessories, it is possible to build an almost identical replica of Simone Mancini’s Ducati Desmo250 MX from the EMX250. Almost all components of the factory bike are available through Ducati Performance. The only exception is the factory Showa suspension, which is not available to private riders. The available components include, amongst others, factory parts machined from solid blocks such as triple clamps, a complete exhaust system or an Akrapovič titanium rear silencer, Brembo Racing brake calipers and the Showa Kit A suspension. The range of accessories is being expanded gradually.”

Clothing

“To complete the perfect factory look, Ducati Performance also offers a technical clothing collection developed in collaboration with Drudi Performance. The range includes jerseys, trousers, gloves and boots from Alpinestars, an Arai helmet, a windbreaker, a softshell jacket and a rain jacket from Spidi.»

Availability

The Desmo250 MX will be available from July 2026 at selected Ducati dealers across Europe.

Advertisement

Advertisement

Desmo250 MX Model Year 2027

  • Colours: Ducati Red

  • Desmo250 single-cylinder engine with a displacement of 249.7 cm³

  • Maximum power of 44.5 PS at 12,500 rpm, maximum torque of 28.3 Nm at 8,800 rpm

  • Aluminium double-loop frame

  • Fuel tank with a capacity of 7.2 litres

  • Fully adjustable 49 mm Showa upside-down fork with 310 mm travel and Kashima coating

  • Fully adjustable Showa rear shock absorber with 301 mm rear suspension travel

  • Aluminium swingarm

  • Brembo braking system with individual Galfer brake discs (260 mm front, 240 mm rear)

  • Pirelli Scorpion MX32 Mid-Soft tyres in sizes 80/100-21 and 100/90-19

  • DID drive chain

  • Takasago Excel aluminium rims with Alpina spokes in sizes 21 x 1.60 inches and 19 x 2.15 inches

  • 2 power modes, 2 riding modes

  • Riding Modes configurable via the optional X-Link app

  • Latest-generation electronics package featuring three-stage adjustable Ducati Traction Control (DTC), Power Launch, automatic gearshift and Engine Brake Control

Seen already?

Don't miss out on any highlights: The Speedweek newsletter, sent out twice a week, delivers the latest news, exclusive commentary and all the important dates from the world of motorsports - directly into your inbox


Topics

    Speedweek.com – The best motorsport on the web

    The latest news around the clock, analyzed and commented on by experts, with exclusive behind-the-scenes insights. Here, fans write for fans.

    Reports

    Editorial

    Series